FS400 Stihl Strimmer Brush cutter Spares Or Repair (many extra and new parts)

  

FS400 Stihl Strimmer Brush cutter - Spares Or Repair + many extra parts (incl new). This was a rebuild project which I never got around to completing. (Or starting actually, but I had ordered new parts and sorted and cleaned some of the original parts). I believe it is pretty much complete except for the starter housing, which was broken and scrapped.

There are quite a few new parts and I believe I went through the parts diagrams to order them, so fairly certain of this, but it was several years ago! Pics 1-10 show the motor: there are 2 decent cylinders, a muffler, decomp valves, spare flywheel, clutch and coil. There's a spare tank, but not sure how good it is. The other parts are screws, bolts or nuts relating to the motor. I don't know if the pair of new bearings are for this but they are there anyway. Pics 11-13 show the carb/inlet/air filter area. There are 4x FS carbs - I'm not sure which were working when they were gathered up, but 1 is missing a butterfly. They will need a thorough check and clean. No idea what the other carb was from.

Pics 14-17 are the handle assemble. Most parts are original but there's a new cable, handle clamp and nut and spring etc. Pic 18 shows the cutting head components. There's a spare head, blades with washers, spacers and nuts etc. The bump head is almost new as well.

Pic 19 show stater components. Pic 20-23 show the bagged new parts.

Pic 24 is various bolt/nuts but not sure where they go on the machine! The only reason I've had to abandon the project is because I simply don't have the space or time in my schedule these days - this has probably been sitting in bags in a box for at least 8 years now! I can offer carriage as I have a box long and large enough to send by courier.

Apologies for this being a lengthy description but wanted to make sure it was clear what is being offered. Please study the pictures carefully as they form part of the description.

What you see is what you will get. Happy to answer any questions or provide extra photos.